Drinkpod USA Drinkpod400 Manual de uso y cuidado descargar pdf (Pagina 7)

| 7

■

Choose a location for your Series

400 that is away from direct

sunlight, excessive heat and/or

cold, and wetness.

■

Make sure there is at least 3” of

space behind the unit to allow for

proper fan function.

■

Be sure there is an electrical outlet

close by that has the correct power

voltage.

■

DO NOT use tubing with less than a

180 PSI rating.

■

DO NOT connect copper tubing to

the elbow fitting, shutoff valve, or

directly to the Series 400. If copper

tubing is used it may result in a

serious leak. If building code or

regulations require copper tubing,

contact Drinkpod Technical Support

for specific instructions and

recommendations for adapter

fittings.

■

Make sure there are no sharp bends

or kinks in the tubing. Allow extra

tubing to prevent stress on the

fittings. Avoid tubing contact with

other objects and sharp edges.

■

All tubing used in the elbow fitting

and shutoff valve must be clean, cut

square with a sharp knife or razor,

and free of nicks and burrs.

■

If you need additional tubing, make

sure it is ¼ inch OD and meets

ANSI/NSF and FDA standards for

drinking water.

DO NOT use tubing of an unknown

quality or origin.

installation notes

WARNING: Risk of electric shock and damage to interior walls or

leak and/or flood if improperly installed. Use the following

guidelines to help you ensure quick, easy and proper installation

of your Series 400.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentarios a estos manuales

Sin comentarios

Drinkpod USA Drinkpod400 Manual de uso y cuidado Pagina 7

Comentarios a estos manuales